Need help?Do you have a question about the Danfoss TP7001 Range and is the answer not in the manual?
General| Protection Class | IP30 |
|---|---|
| Type | Room Thermostat |
| Power Supply | 230V AC |
| Temperature Range | 5°C to 30°C |
| Frost Protection | Yes |
Details on qualified installer and compliance with wiring regulations.
Technical specifications including power, memory, switching action, and dimensions.
Steps for wallplate removal, clearances, and mounting location advice.
Diagrams for wiring connections and instructions for battery installation.
Using DIL switches for tamperproofing and the unit startup procedure.
Information on how to access the service interval timer feature.
Step-by-step guide to access advanced installer settings.
Configuring temperature limits, on/off functions, and operating modes.
Adjusting integration time, override rules, and low battery relay state.
Configuring keyboard lock, random start, and site/thermostat reference numbers.
Setting date format, LCD behavior, +Hours function, and calibration bias.
Defining remote sensor types and setting the limit sensor set-point.
Configuring the switch type for digital input, e.g., normally open/closed.
Resetting the unit for display freezes or user settings.
Resetting all installer programming and settings to factory defaults.
To Next Page