EasyManua.ls Logo

Danfoss TP7001 Range - Digital Input Configuration

Danfoss TP7001 Range
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TP7001
16
GB
Option 94 - Con gure Digital Input Switch Type
(One of options 90-92 set to 3)
This allows the switch type of the digital input to be
con gured. Press + until Option 94 is displayed, use V
or Λ to select required setting.
This option is only possible if one remote sensor
option is set to Digital Input (Setting 3)
0 = Contacts Normally Closed, open circuit contact
to force unit into thermostat mode, short circuit
contacts to return to normal operation.
1 = Contacts Normally Open, short circuit contacts to
force unit into thermostat mode, open circuit contacts
to return to normal operation (Factory setting)

Related product manuals