Danfoss TP5 User Manual

17
20
i2 24
pm
Press PROG until the colon in the LCD
display starts to fl ash.
The unit is now in RUN mode and the
heating will come on and go off at the
programmed times
Note: A fl ame symbol will appear in
the display whenever the thermostat is
calling for heat.
Ensure the TP4 is in RUN mode before
sliding the cover shut.
Please go to page 20.
!
User Instructions
GB

Danfoss TP5 Specifications

General

Control Mode	On/Off
Power Supply	2 x AA Batteries
Display	LCD
Type	Room Thermostat
Mounting	Wall-mounted
Temperature Range	5°C to 30°C
Accuracy	±0.5°C
Battery Life	2 years