Danfoss TP5 User Manual

6
!
Some existing thermostats wil
have a Neutral wire and/or
Earth wire connected. These are
not required by the TP4/5 and
must NOT be connected to any
TP4/5 terminals. Instead they
should be made electrically safe
and coiled in the recess at the
back of the TP4/5.
Wiring
Installation Instructions
GB

Danfoss TP5 Specifications

General

Control Mode	On/Off
Power Supply	2 x AA Batteries
Display	LCD
Type	Room Thermostat
Mounting	Wall-mounted
Temperature Range	5°C to 30°C
Accuracy	±0.5°C
Battery Life	2 years