Danfoss TP5001 - Easy Setting Guide Manual

Danfoss TP5001 Easy Setting Guide
Setting the heating programmes on the TP5001 is done in two stages:
1. Set the correct time and date
2. Set the times at which you wish the room to be a set temperature.
Please see below for a step by step guide:
Set the clock:
Instruction
Buttons Used
Screen Display
Press
the
button to illuminate the screen. Press
again
and the HOUR will flash. Use < or > to set the correct hour and
press .
< > M
Use
<
or
>
to set the correct
MINUTE
and press
and the
DAY
will flash. Use < or > to set the correct DAY and press M to
return to the normal operating screen.
< > M
Display item meanings:
Symbols Function description Symbols Function description
Mon – Sun
Current set day
Schedule mode
Current on/off period
Holiday mode
AM PM
Current set time /
parameter number
in setup
RF Status
(TP5001RF only)
Room temperature
Battery low indicator
(TP5001B & TP5001RF
only)
Temperature
indication
Power on/off
SET
Set temperature
Timer and program
operation
Heating active
M
Mode change /
option setting
Frost protect active
< >
Temperature / option
setting selectors