10
c) When all 6 events are correct,
press DAY to programme events
for Day 2.
(If you wish to repeat the
previous day’s programme,
simply press COPY)
d) Repeat steps b & c above to
programme (or COPY)
events for Days 3, 4, 5, 6 & 7
Returning to RUN Mode –
press PROG until colon fl ashes
in display
Press PROG until Event 1
fl ashes, then press DAY until
display shows Day 1-5.
Follow steps b & c on page
9-10 to programme times &
temperatures for weekdays
Press DAY to programme
events for weekend (Day 6-7) or
press COPY to repeat weekday
programme
Returning to RUN Mode –
press PROG until colon fl ashes
in display
Programming in 5/2 day mode
(one set of programmes for weekdays, another set for weekends)
1 2 3 4 5
GB - User Instructions
To Next Page
Loading...
