Danfoss VLT 3000 Series User Manual

61MG.30.A7.02 - VLT
®
is a registered Danfoss trademark
Different modes,
different information
See the list of status, reset and alarm mes-
sages on page 122.
See the list of parameters on pages
151-152.
00.0 Hz
FREQUENCY ➜
FUNCTION OK 1
RESET MODE
REASON FOR ALARM
SET DATA VALUE
FLASHING PARAMETER NUMBER
0.. = FLASHING CURSOR
STATUS, including indication of local operation
NAME OF SELECTED DISPLAY READ-OUT
SELECTED DISPLAY READ-OUT, including unit
ACTIVE SETUP
SELECTION
(1-4 CAN BE SELECTED
IN PARAMETER 001)
PARAMETER NAME
NAME
FLASHING PARAMETER NUMBER
0.. = FLASHING CURSOR
E= FLASHING CURSOR
SET DATA VALUE
ROTATION DIRECTION
PARAMETER GROUP
PARAMETER NAME
00.0 Hz
0.. OPERATING
SETTING
00.0 Hz
00 0 LANGUAGE
ENGLISH 1
00.0 Hz
LANGUAGE
E NGLISH 1
The display will give you different infor-
mation, depending on the mode and the
operation setting.
DISPLAY MODE
MENU MODE
PARAMETER MODE
DATA MODE
ALARM MODE
ALARM
TRIPPED
OVERVOLTAGE
Display layout
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Danfoss VLT 3000 Series Specifications

General

Brand	Danfoss
Model	VLT 3000 Series
Category	Media Converter
Language	English