VLT® 5000 Crane
Programming
639 FLASH TEST
Value:
Off (OFF)
[0]
✭On (ON)
[1]
Function:
Checks the consistency of the program in flash
proms during every power-up.
650 PASSWORD
Value:
✭Password level 2 (PASSWORD LEVEL 2)
[000002]
Password level 1 (PASSWORD LEVEL 1)
[110775]
Function:
After entering the correct password the new protection
levelisshownintheLCP.Afterpowerupthe
password is to be re-entered in order to enable
changing the protected parameters.
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.50.N4.02 - VLT is a registered Danfoss trademark
73
To Next Page
Loading...
