Danfoss VLT CANopen MCA 105 Programming Guide

Option
Name
Description
[17]
Analog input AICCT
Value is in [°]. AICCT is control card temperature.
[18]
Pulse input FI29
N O T I C E
This option is only available in FC 302.
The value is in %.
[19]
Pulse input FI33
The value is in %.
[20]
Alarm number
Shows the actual alarm number.
N O T I C E
With this selection, it is not possible to use < and > as comparator operators.
N O T I C E
Several alarms/warnings can be present at the same time. As the alarm/warning numbers
are not grouped in a predefined order, defining a range is not relevant.
[21]
Warning number
Shows the actual warning number.
N O T I C E
With this selection, it is not possible to use < and > as comparator operators.
N O T I C E
Several alarms/warnings can be present at the same time. As the alarm/warning numbers
are not grouped in a predefined order, defining a range is not relevant.
[22]
Analog input X30/11
[23]
Analog input X30/12
[30]
Counter A
[31]
Counter B
[32]
Process PID error
Value of the PID error (parameter 18-90 Process PID Error).
[33]
Process PID Output
Value of the PID output (parameter 18-91 Process PID Output).
[34]
Analog input X48/2
[35]
Temp input X48/4
[36]
Temp input X48/7
[37]
Temp input X48/10
[39]
Safe opt. speed error
[43]
Analog input X49/1
[44]
Analog input X49/3
AU275636650261en-000101 / 130R0334382 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT CANopen MCA 105 Specifications

General

Brand	Danfoss
Model	VLT CANopen MCA 105
Category	DC Drives
Language	English