Danfoss VLT CANopen MCA 105 Programming Guide

Option
Name
Description
[91]
Torque limit & stop
If the drive has received a stop signal and is at the torque limit, the signal is logic 0.
[92]
Brake fault (IGBT)
The brake IGBT is short-circuited.
[93]
Mech. brake control
The mechanical brake is active.
[94]
Safe stop active
N O T I C E
This option is only available in FC 302.
[100]
Comparator 0
The result of comparator 0.
[101]
Comparator 1
The result of comparator 1.
[102]
Comparator 2
The result of comparator 2.
[103]
Comparator 3
The result of comparator 3.
[104]
Comparator 4
The result of comparator 4.
[105]
Comparator 5
The result of comparator 5.
[106]
Comparator 6
The result of comparator 6.
[107]
Comparator 7
The result of comparator 7.
[108]
Comparator 8
The result of comparator 8.
[109]
Comparator 9
The result of comparator 9.
[110]
Logic rule 0
The result of logic rule 0.
[111]
Logic rule 1
The result of logic rule 1.
[112]
Logic rule 2
The result of logic rule 2.
[113]
Logic rule 3
The result of logic rule 3.
[114]
Logic rule 4
The result of logic rule 4.
[115]
Logic rule 5
The result of logic rule 5.
[116]
Logic rule 6
The result of logic rule 6.
[117]
Logic rule 7
The result of logic rule 7.
[118]
Logic rule 8
The result of logic rule 8.
[119]
Logic rule 9
The result of logic rule 9.
[120]
SL time-out 0
The result of the SLC timer 0.
[121]
SL time-out 1
The result of the SLC timer 1.
[122]
SL time-out 2
The result of the SLC timer 2.
[123]
SL time-out 3
The result of the SLC timer 3.
[124]
SL time-out 4
The result of the SLC timer 4.
[125]
SL time-out 5
The result of the SLC timer 5.
AU275636650261en-000101 / 130R0334384 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT CANopen MCA 105 Specifications

General

Brand	Danfoss
Model	VLT CANopen MCA 105
Category	DC Drives
Language	English