Danfoss VLT CANopen MCA 105 Programming Guide

Parameter 15-12 Trigger Event
Table 771: Parameter 15-12 Trigger Event
15-12 Trigger Event
Default value: [0] False
Parameter type: Option
Setup: 1 setup
Conversion index: -
Data type: Uint8
Change during operation: True
Select the trigger event. When the trigger event occurs, a window is applied to freeze the log. The log then retains a specified per-
centage of samples before the occurrence of the trigger event (parameter 15-14 Samples Before Trigger).
Option
Name
Description
[0]*
False
[1]
True
[2]
Running
[3]
In range
[4]
On reference
[5]
Torque limit
[6]
Current limit
[7]
Out of current range
[8]
Below I low
[9]
Above I high
[10]
Out of speed range
[11]
Below speed low
[12]
Above speed high
[13]
Out of feedb. range
[14]
Below feedb. low
[15]
Above feedb. high
[16]
Thermal warning
[17]
Mains out of range
[18]
Reversing
[19]
Warning
[20]
Alarm (trip)
[21]
Alarm (trip lock)
[22]
Comparator 0
[23]
Comparator 1
[24]
Comparator 2
[25]
Comparator 3
AU275636650261en-000101 / 130R0334482 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT CANopen MCA 105 Specifications

General

Brand	Danfoss
Model	VLT CANopen MCA 105
Category	DC Drives
Language	English