Danfoss VLT CANopen MCA 105 Programming Guide

Parameter 0-72 Time Format
Table 45: Parameter 0-72 Time Format
0-72 Time Format
Default value: [0] 24 h
Parameter type: Option
Setup: 1 setup
Conversion index: –
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]*
24 h
[1]
12 h
Parameter 0-73 Time Zone Offset
Table 46: Parameter 0-73 Time Zone Offset
0-73 Time Zone Offset
Default value: 0 min
Parameter type: Range, -780 - 780 min
Setup: 2 setups
Conversion index: 70
Data type: Int16
Change during operation: False
Enter the time zone offset relative to UTC. This parameter is required for the automatic daylight saving time adjustment.
Parameter 0-74 DST/Summertime
Table 47: Parameter 0-74 DST/Summertime
0-74 DST/Summertime
Default value: [0] Off
Parameter type: Option
Setup: 1 setup
Conversion index: –
Data type: Uint8
Change during operation: True
Select how to handle daylight saving time/summer time. For manual setting of DST/summer time, enter the start date and end date
in parameter 0-76 DST/Summertime Start and parameter 0-77 DST/Summertime End.
Option
Name
Description
[0]*
Off
[2]
Manual
Parameter 0-76 DST/Summertime Start
Table 48: Parameter 0-76 DST/Summertime Start
0-76 DST/Summertime Start
Default value: Size related
Parameter type: Range, 0 - 0
Setup: 1 setup
Conversion index: 0
Data type: TimeOfDay
Change during operation: True
Sets the date and time when DST/ summer time starts. The date is programmed in the format selected in parameter 0-71 Date For-
mat.
AU275636650261en-000101 / 130R033460 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT CANopen MCA 105 Specifications

General

Brand	Danfoss
Model	VLT CANopen MCA 105
Category	DC Drives
Language	English