EUDECLARATION OF CONFORMITY
Product :Smart Projector
Trademark :Dangbei
Model Designation :DBOD02
Manufacturer’s Name :Shenzhen Dangs Science and Technology Co.,Ltd.
Manufacturer’s Address :901,GDC Building,Gaoxin Mid 3nd Road,Maling Community,Yuehai Sub-district,Nanshan District,
Shenzhen,China.
Manufacturer’s Phone :86-755-26907499
We, Shenzhen Dangs Science and Technology Co.,Ltd.declareunder our sole responsibility that the above referenced
product is in conformity with the applicable requirements of the following directives:
REDDirective : 2014/53/EU RoHSDirective : 2011/65/EU (EU) 2015/863
WEEEDirective : 2012/19/EU REACHRegulation : 2006/1907/EC
Conformity with these directives has been assessed for the product by demonstrating compliance to the following
harmonized standards and/or regulations:
EN 62311:2008
EN301489-3 V2.3.2(2023-01)
EN55035:2017+A11:2020
EN301893 V2.1.1(2017-05)
2011/65/EUđ (EU) 2015/863
Signed for and on behalf of:Shenzhen Dangs Science and Technology Co.,Ltd.
Place: Shenzhen,China Date:2024-02-07 Name: Libing Zhang Position:Certification Engineer
Signature:
ENIEC62368-1:2020+A11:2020
EN301489-17 V3.2.4 (2020-09)
EN61000-3-2:2019+A1:2021
EN300440 V2.1.1(2017-03)
2006/1907/EC
EN301489-1V2.2.3 (2019-11)
EN55032:2015+A11:2020
EN61000-3-3:2013+A2:2021
EN300328 V2.2.2 (2019-07)
2012/19/EU
20
EN