P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au
PAGE 13
Notice: to use the oven in manual mode (not using the end cooking time programmer);
the symbol must be aligned with the reference mark on the control panel.
ROTISSERIE
To start the rotisserie, proceed as follows:
• Insert the rotisserie rod “A” into the drive unit and groove “B” into bend “C”;
• Turn the plastic handle “D” anti-clockwise and slide the rack into the oven runners ensuring
that the rod “E” slots into the hole “F”;
• The rotisserie rack must always be fitted in the middle of the oven
(second position from bottom)
• Press the Oven function selection or to select setting
To Next Page
Loading...
