Daniela DAN90AFS - General Instructions

P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au
PAGE 17
END TIME
To set when the oven is to switch o again.
TIME
To set, change or check the time (See also section “Before Using for the First Time”)
GENERAL INSTRUCTIONS
• After a clock function has been selected, the corresponding symbol flashes for approx.
5 seconds. During this time, the desired times can be set or modified
using the or button.
• When the desired times has been set, the symbol continues to flash for approx. 5 seconds.
• After this the symbol lights, up. The set Countdown begins to count down.
• The time set for Cook time and End time begins to count down after the selected
function starts.
MINUTE MINDER
• Press the Clock Function button repeatedly until the symbol for Minute Minder flashes.
• Set the desired Minute Minder time using the or button (max. 59.00 minutes).
• After approx. 5 seconds the display shows the time remaining.
• The symbol for Minute Minder lights up.
• When the time set has elapsed, an audible signal sounds for 1 minutes. “0.00” lights up and
the symbol for Minute Minder flashes.
To turn o the audible signal: Press any button.
COOK TIME
• Select oven function and using or button select temperature.
• Press the Clock Function button repeatedly until the symbol for Cook time flashes.
• Using the or button set the desired cooking time.
• The oven switches itself on. The symbol for Cook time lights up.
• By repeatedly pressing the Clock Function button, the current time can be called up.
• When the time has elapsed, an audible signal sounds for 3 times.
• The oven switches itself o. “0.00” is displayed and the symbol for Cook time flashes.
• To turn o the audible signal: Press any button.