P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au
PAGE 18
END TIME
• Select oven function and using or button select temperature.
• press the Clock Function button repeatedly until the symbol for End time flashes.
• Using the or button set the desired switch-o time.
• The symbols for End time and Cook time light up.
• The oven will automatically switch itself on.
• By repeatedly pressing the Clock Function button, the current time can be called up.
• When the time has elapsed, an audible signal sounds for 3 times.
• The oven switches itself o. “0.00”is displayed and the symbols for End time and Cook
time flash.
• To turn o the audible signal: Press any button.
DELAYED COOKING - COOK TIME AND END TIME COMBINED
Cook time and End time can be used simultaneously, if the oven is to be switched on and o
automatically at a later time.
• Select oven function and temperature.
• Using the Cook time function, set the time that the dish needs to cook for, e.g. 1 hour.
• Using the End time function, set the time at which the dish is to be ready for, e.g. 14:05.
• The symbols for Cook time and End time light up.
• The oven switches on automatically at the time calculated, e.g. 13:05.
• When the set cooking time has elapsed, an audible signal sounds for 3 times.
• The oven switches itself o, e.g. 14:05.
OTHER FUNCTIONS
SWITCHING OFF THE DISPLAY
You can save energy by switching o the display.
SWITCHING OFF THE DISPLAY
• If required, switch o the appliance using the On/O button.
• Press the Clock Function button and the button at the same time until the display
goes out.
• As soon as the appliance is switched on again, the display comes on automatically. When the
appliance is next switched o, the display goes out again.
To Next Page
Loading...
