Dansensor ISM-3 - Maintenance

Dansensor A/S COPYRIGHT © PBI-200114-D 04/2013
ISM-3 EN User Manual 17
5. Maintenance
ISM-3 requires for a minimum of maintenance and as the oxygen-sensor itself is very long term stable,
no calibration of the analyser in a normal application situation is needed between the obligatory 12
months service control intervals.
See "Recommendations" on page 7 for details.
If ISM-3 is installed in places with more dust than normal, it may be necessary to change the cooling air
filter between the obligatory 12 months service control intervals.
When cleaning the front panel, use only water or a mild soap lather.