PBI-200114-D 04/2013 COPYRIGHT © Dansensor A/S
14 User Manual EN ISM-3
Sub menus
ISM-3 is equipped with 3 sub menus as shown in Figure 4.
Fig. 4. ISM-3 sub menus
• Press and hold and simultaneously for 3 seconds (ISM-3 must not be in a sub menu).
• Now you have access to the 3 sub menus:
Set-up menu (
SET.)
Diagnostic menu (
DIA.)
Calibration menu (
CAL.)
No matter which menu you are in, the device will return to display the actual O
2
when no key has been
activated for about 20 seconds.
The parameters in the diagnostic menu can be set to permanent readout.
To Next Page
Loading...
