DanTaet System KMP-V - Liquid Sensor Wet

DanTaet a/s
User Manual System KMP-V
110101 func. spec. 160926
Doc.No. 417106
Revision 170823
Page 12 of 26
Liquid Sensor wet
○ Status
○ Data
● Valve
● Max.Alarm
● Seepage Alarm
○ Consumption
Alarm: attached liquid
sensor is wet.
The water supply
is cut off
(Jumper F5 inserted)
Liquid sensor wet alarm
after buzzer mute.
The water supply
is cut off
(Jumper F5 inserted)
○ Status
○ Data
● Valve
☼ Max.Alarm
☼ Seepage Alarm
○ Consumption
● Status
○ Data
● Valve
● Max.Alarm
● Seepage Alarm
○ Consumption
Alarm: attached liquid
sensor is wet.
The water supply is
unimpeded (Jumper F5
not inserted)
Liquid sensor wet alarm
after buzzer mute.
The water supply is
unimpeded (Jumper F5
not inserted)
● Status
○ Data
● Valve
☼ Max.Alarm
☼ Seepage Alarm
○ Consumption