DanTaet System KMP-V - Electrical Installation

DanTaet a/s
User Manual System KMP-V
110101 func. spec. 160926
Doc.No. 417106
Revision 170823
Page 22 of 26
Electrical Installation
The valve cable terminates in a DIN plug which connects to the KMP-V socket. Connection of the KMP-V to
mains, external controls, communication and remote alarm systems is shown is illustrated here.
MULTICAL

is installed per Kamstrup’s instructions. MULTICAL

62 must be equipped with a top or bottom
data module, and a 24Vac power supply module.
Mains Connection
230Vac PE - N - L via key switch
Alarm Relay
Terminal J17: Max. 24Vac NC-COM-NO
Volt-free relay, excited in the Normal condition.
Signal Relay
Terminal J16: Max. 24Vac NC-COM-NO
Volt-free relay, excited in the Normal condition
Digital Input 1
Terminal J9: 12Vdc @ 4kOhms
Fire Alarm (ABA) attachment.
Function Select by jumpers F1-F3.
Digital Input 2
Terminal J10 12Vdc @ 4kOhms
Burglar Alarm (AIA) attachment.
Function Select by jumpers F1-F3.
KMP interface
L-to-R: GND-Req-Data
Digital Outputs
IRPT - Presence - Unlimited - GND
Max 100 mA 40Vdc
24Vac to MULTICAL
J15 pins 1,2
PIR Input 3 / 2 / 1
3: J5 - 2: J4 - 1: J3
+12V - Sig - GND
V1 V2