DanTaet System KMP-V - Disturbance

DanTaet a/s
User Manual System KMP-V
110101 func. spec. 160926
Doc.No. 417106
Revision 170823
Page 9 of 26
Disturbance
● Status
○ Data
● Valve
○ Max.Alarm
○ Seepage Alarm
○ Consumption
Monitoring with disturbance:
Status indicator is a steady
yellow. The valve does not
close tight, and the system
should be serviced.
Consumption phase:
Low/Holiday/Absence
☼
Status
○ Data
● Valve
○ Max.Alarm
○ Seepage Alarm
○ Consumption
The system is running-
in, and cannot issue
leakage alarms. Key
consumption values are
measured and stored.
Consumption phase:
Low/Holiday/Absence
Run-In
● Status
○ Data
● Valve
○ Max.Alarm
○ Seepage Alarm
● Consumption
Monitoring with
disturbance:
Status indicator is a steady
yellow. The valve does not
close tight, and the system
should be serviced.
Consumption phase:
High/Normal/Presence
☼
Status
○ Data
● Valve
○ Max.Alarm
○ Seepage Alarm
● Consumption
The system is running-
in, and cannot issue
leakage alarms. Key
consumption values are
measured and stored.
Consumption phase:
High/Normal/Presence