4
General information
This section provides general information about the unit and this Service Manual.
The target group for this Service Manual is the technicians who install, maintain and
repair the unit.
It is the responsibility of the operator to read and understand this service manual
and other information provided and to use the correct operating procedures.
The product should only be operated by qualified (trained) personnel. Failure to
do so can result in personal injury or equipment damage.
Read the entire manual before the initial start-up of the product. It is important to know
the correct operating procedures for the product and all safety precautions to prevent
the possibility of property damage and/or personal injury.
The Service Manual cover the following products:
Copying of this service manual, or part of it, is not allowed without written permission
from Dantherm Air Handling A/S.
The service manual is subject to changes without notice.
CE-Declaration of
Conformity
Dantherm Air Handling A/S, Marienlystvej 65, DK7800 Skive hereby declare that the
unit are in conformity with the following directives:
2006/95/EG Low Voltage Directive including 93/68/EEC where required
86/336 EEC EMC Directive including 92/31/EEC and 93/68/EEC
98/37 EG Machine Directive
The product is manufactured with components which follow the application standards
for Low Voltage Directive and in case of norms for EMC in EU countries.
The unit is designed to last for many years. When the time comes for the unit to be re-
cycled, the unit should be recycled according to national rules and procedures to pro-
tect the environment.
To Next Page
Loading...
