Danuser G20/40 - Hole Digger Head Auger Assemblies

21
Hole Digger Head Augers have replaceable points and teeth. Flights are replaceable, except on 6".
NOTE
Auger Point PN 9353 is the only auger point that can be used with Hole Digger Heads.
NOTE
Ref.
No.
Part Number by Auger Diameter
Description
No.
Req’d
6" 9" 12" 14" 16"
1 6121 6122 6123 6124 6125 40" Hole Depth Auger with Double Flight Construction 1
2 6014 6014 6014 6014 6014
Retaining Bolt (1/2" 13 x 3-1/4" Gr. 8, 1/2" of thread)
SPECIAL BOLT: Use Genuine Danuser Replacement Only
1
3 1056 1056 1056 1056 1056 Retaining Nut (1/2"
13)
1
4 6019 6019 6019 6019 6019 Auger Adapter Replacement (for Field Welding) 1
AUGER ASSEMBLIES WITH HOLE DIGGER HEADS FOR 2" ROUND SPINDLES
Auger No. Teeth Part.
Diameter per Head No.
6" . . . . . . . . . . . . . . . . .2 . . . . . . . . . . . . . . .9386
9" . . . . . . . . . . . . . . . . .4 . . . . . . . . . . . . . . .9306
12" . . . . . . . . . . . . . . . . .4 . . . . . . . . . . . . . . .9308
14" . . . . . . . . . . . . . . . . .6 . . . . . . . . . . . . . . .9309
16" . . . . . . . . . . . . . . . . .6 . . . . . . . . . . . . . . .9310
* Includes head with teeth and roll pins, point and point
adapter with tube, for welding to auger center column.
HOLE DIGGER HEAD KIT*
(Field Weld to Auger)
3
2
1
Hole Digger Head Kits can be welded
onto standard augers.
Ref. Part.
No. Description No.
1 Hole Digger Head Point . . . . . . . . . . . . .9353
2 Hole Digger Head Tooth . . . . . . . . . . . .9234
Hard-Surface Tooth (option) . . . . . . . . .9964
3 Roll Pin (5/16" x 1-1/4") . . . . . . . . . . . .7483
HOLE DIGGER HEAD REPLACEMENT PARTS
Hole Digger Head
Auger Assemblies
= Safety Sign Location