R
www.danvex.fi
17
ERROR MESSAGES
E5 (1): It is displayed when the unit is connected to the power for
the first time and the phase error is found. Please contact your
dealer.
E5 (2): It is displayed during the running process and indicates that
the current is exceeded or the phase is lacking. Clean the
evaporator and condenser. Please contact your dealer.
E6: Indicates the low pressure level. Please contact your dealer.
E7: Indicates the high pressure level. Please contact your dealer.
E8: The refrigerant level is insufficient. Please contact your dealer.
IF THE HUMIDIFIED STOPS WORKING THE DIPLAY WILL SHOW
THE ERROR MESSAGE
To Next Page
Loading...
