DanVex DEH-600wp - Dehumidifier Error Messages and Troubleshooting; Error Codes E0-E4

R
www.danvex.fi
16
ERROR MESSAGES
E0: The defrosting system is not working correctly. Please contact
your dealer.
E1: The dehumidifying sensor is not working correctly. Please contact
your dealer.
E2: The external temperature sensor is not working correctly. Please
contact your dealer.
E3: Ambient temperature is over the working temperature. If the ambient
temperature is over 32°C or below 10°C, it will display error message E3
too. Please contact your dealer.
E4: The defrosting temperature sensor is not working correctly.
Please contact your dealer.
IF THE HUMIDIFIED STOPS WORKING THE DIPLAY WILL SHOW
THE ERROR MESSAGE