R
www.danvex.fi
19
TECHNICAL SPECIFICATIONS
NOTE:
1. Rated noise value is detected in the laboratory.
2. In case of the difference of the specifications indicated in the above table and the
specifications indicated directly on the nameplate it's necessary to use the
specifications of the nameplate.
o
3. Test data: ambient temperature is 30 C, and the ambient humidity is 80%RH.
SPECIAL INSTRUCTIONS:
1. Customer should contact the special service department for the qualified installation
and repair.
2. If any flexible cable is damaged, contact the special service department to replace it
with the original cable.
To Next Page
Loading...
