DAPAudio DCP-24 MKII User Manual

4
DCP-24 MKII Digital Cross Over
Product code: D2083
1. Introduction
Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
● DAP DCP-24 MKII Digital Cross Over
● USB cable (1,5 m)
● AC power adapter (6 V, 800 mA)
● User manual
Fig. 01
Intended Use
This device is intended for professional use as a digital crossover. It is suitable only for indoor installation. It
is not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Text Conventions
Throughout the user manual the following text conventions are used:
● Buttons: All buttons are in bold lettering, for example “Press the UP/DOWN buttons”
● References: References to chapters and parts of the device are in bold lettering, for example:
“Refer to 2. Safety”, “press the power switch (03)”
● 0–255: Defines a range of values
● Notes: Note: (in bold lettering) is followed by useful information or tips

DAPAudio DCP-24 MKII Specifications

General

Brand	DAPAudio
Model	DCP-24 MKII
Category	Crossover
Language	English