5
XPS-16+ Specifications
XPS-16+ Automatic Measurement Features
Your XPS-16+ has many features so carefully designed and engineered that you may not even
be aware of their uniqueness. Once the cycle start button has been pressed, your Darex XPS-
16+ begins taking measurements of the drill on the way to the grinding wheel. It locates the end
of the drill, calculates diameter, locates and positions the cutting edge, determines web thick-
ness, identies initial contact point of drill to the wheel and then sharpens. After sharpening
and before splitting the drill, the sharpener again measures and re-locates the end of the drill,
ensuring an accurate split.
Specifications
• Standard Grinding Wheels: 180 Grit CBN, 220 Grit DIA
• Operating temperature: Not less than 7°C (45°F) or more than 32°C (90° F)
• Motor Specs: BLDC motor 115/230 V RPM 3800-4500 50/60 hz
• Power requirements: 8 amp @ 115 V; 4 amp @ 230 V
• Machine Dimensions: 66cm W x 56cm D x 30.5cm H (26” W x 22” D x 12” H)
• Machine Weight: 52 kg (115lbs)
• Shipping Dimension: 78cm W x 89cm D x 45cm H (31” W x 35” D x 18” H)
• Vacuum Dimensions: 36cm D x 49cm H (14” D x 18” H)
• Vacuum Weight: 14 kg (30lbs)
• Total Ship Weight: 66 kg (145lbs)
• Assembled in the USA from US and foreign parts
• Warranty: 1 year defective parts and labor
Drill Holder
Emergency Stop
Cycle Start
Cycle Stop
LCD
Touch
Screen
Grind
Wheel
Storage
Grind Wheel
Wheel Guard Cover
Chuck
Environmental
Door
To Next Page
Loading...
