Darex XT-3000 User Manual

1
®
Operating
Instructions
CAUTION: To reduce the risk of injury, the user must read and understand this
instruction manual before using this product. Save these instructions for future reference.

Darex XT-3000 Specifications

General

Model	XT-3000
Category	Power Tool
Type	Drill Bit Sharpener
Power	Electric
Voltage	115V
Speed	3450 RPM
Drill Capacity	1/8" to 3/4"
Sharpening Range	1/8" to 3/4"

Summary

Safety Instructions

Grounding Instructions

Guidelines for safe electrical grounding.

General Safety Precautions

Important warnings for operating the machine safely.

XT-3000 Specification Sheet

Specifications for 115V & 230V

Technical electrical and mechanical specifications of the XT-3000.

Setting up the XT3000

Drill Alignment

Setting Material Removal Amount

Adjusting the knob to control stock removal from the drill.

Setting Alignment Tube for Heel Relief

Adjusting the alignment tube for desired drill relief.

Drill Sharpening

Mounting the Sharpening Fixture

Adjusting the Point Angle

Drill Point Splitting

Adjusting the Depth of Split

XT-3000 WHEEL INFORMATION

Wheel Maintenance

Replacing the Wheel

GENERAL MAINTENANCE

Trouble Shooting XT-3000 Drill Sharpening

LEX050 - Large Drill Attachment

XT3000 Auto Sharpening Attachment

Auto Specification Sheet

Specifications for the auto sharpening attachment.

Quick Start Setup

Step-by-step guide to setting up the auto sharpening system.

Attaching Sharpening Fixture

Mounting Controller/Display

Connecting Components

Display Details

Explanation of the controller display functions and settings.

Auto Sharpening Fixture

Drill Stick Out Calibration

Calibrating drill stick out for consistent results.

Maintenance

General Maintenance Procedures

Wheel Maintenance

Chuck Maintenance

Trouble Shooting