2 / 47
Safety Precautions
Unpacking
Test
Attention
If the product is found to be damaged or missing parts, it cannot
be installed, otherwise it may malfunction. If the packing list
does not match the physical name, please do not install and
contact the dealer in time.
Install
Danger
Wiring work must be performed by electrical engineers,
otherwise there is danger of electric shock or damage to the
system.
Before wiring, make sure that the power is off, otherwise there is
danger of electric shock or fire.
The installed cable must meet the requirements, and the power
distribution part must comply with the safety regulations.
Installation must be carried out in strict accordance with the
following installation steps, otherwise it will cause product
damage.
Attention
When handling and installing, please lift it gently to avoid injury
to the foot or damage to the product.
Keep the system away from flammable objects and away from
heat sources.
Do not drop debris into the system when installing this system,
otherwise it may cause system failure.
Work Run
Danger
During normal operation, it is strictly forbidden to directly touch
the terminals such as output and input to avoid electric shock
hazard.
Do not open the casing of the machine directly during normal
operation, otherwise it may cause electric shock.
Attention
Before running, please ensure that the product is used within the
allowable working range, otherwise it will cause damage to the
product.
When the product is not used for a long time, the battery should
be discharged to between 45% and 60% of the battery, and the
battery output should be disconnected to avoid the battery being
emptied.
To Next Page
Loading...