Data Aire dap4 - Zone Status Screen

10
Status Loop (continued):
The next screen in the status loop is the Zone Status screen, which displays the
status of the zone. (Note: this screen only appears on Unit 1 when the Zone
Control feature is enabled).
The next screen the Zone Units screen, which displays the status of each units in
the zone. Note: this screen only appears on Unit 1 when the Zone Control feature
is enabled.
Touch the unit icon to see specific information such as Temperature, Humidity and
Airflow. General unit status is indicated by color:
Green = Unit On Blue = Unit in Standby
Red = Unit in Alarm Gray = Unit set not to participate