dap4 Color Touch Display
There are several touch sensitive areas on home screen of the display. Listed below
is how each area works when it is touched.
Access service menus shown later in this manual (requires holding 1 sec.)
Displays the next screen.
Displays the Alarm Log screen.
Touch Temp/Hum
readings to display the
Set Points screen.
LED Unit Status
White = On Blue
= Cooling Green
= E. Saver
Red = Alarm
“Power Key” turns Unit on or off.
Color red = unit is off, Green = unit is on.
Displays the system
Information Screen.
Status Loop
The first screen in this loop is the Home screen, which displays the basic status of
the unit. It contains icons that appear when a specific operation is running as
described below:
Fan On - If variable type, speed modulation is also shown.
To Next Page
Loading...
Need help?
General
