Compressor On - A number will also appear next to the icon to
indicate multiple compressors are running. If variable type, speed
modulation is also shown.
Humidifier On - If variable type, humidity demand modulation is
also shown.
Dehumidification Mode Running.
Heaters On - A number will also appear next to the icon to indicate
multiple heaters are on. If SCR or Hot Water heat type, heat
modulation is also shown.
Chilled Water Cooling On – A number will also appear next to the
icon to indicate valve modulation.
Energy Saver Available – Indicates that chilled water is cold enough
to provide cooling. Also indicates if Airside economizer can provide
cooling with damper modulation shown to the right.. Both are optional
features.
CO2 Valve On – This option only available on gPOD model.
To Next Page
Loading...
