The next screen in the status loop is the Airside Economizer Status screen. Note:
this screen only appears when the Airside Economizer is enabled is installed.
Sensor readings are displayed based on the Mode setting of the airside
economizer. Any condition that disables the economizer from running is shown in
red text at the bottom of this screen.
The next screen in the status loop is the Trending screen. It displays the historical
trends of the return air temperature and humidity. Additional trends of discharge air
temperature and chilled water temperature will also appear if installed. To display
the legend information, touch the information icon located at the top right corner.
The historical time frame screen can be scrolled forward or backwards by pressing
and dragging the screen.
To Next Page
Loading...
