Installation, Operation and Maintenance Manual
NOTICE Any installation of an auxiliary device shall not require the cutting,
wiring or the soldering of connections by the installer, and shall not require
cutting, drilling or welding in the electrical enclosure(s) and in other areas where
such operations may damage electrical or refrigeration components and wiring.
CAUTION For replacement of fuses, replace with same size fuse size and type
or equivalent.
NOTICE Data Aire products are strictly for non-residential applications.
NOTICE Using substitute parts or bypassing electrical or refrigeration
components is not recommended and will VOID THE WARRANTY.
NOTICE Using substitute parts or bypassing electrical or refrigeration
components is not recommended and will VOID THE WARRANTY.
NOTICE TO CUSTOMER/CONTRACTOR PROTECT YOUR WARRANTY PRIOR TO
STARTUP.
• Read and follow the Installation & Start-up Instructions provided with this
equipment.
• Storage of this equipment must be on a flat surface and protected from the
weather.
• Protect this equipment from damage, construction dirt, debris, freezing
temperatures and water.
• Make sure all shipping materials have been removed.
• A qualified startup technician must complete the Data Aire “Field start up
test sheet”
To Next Page
Loading...