DataCard SP55 Plus User Manual

Page 12
Blinking Amber The printer has an error. Check the following:
• See the PC for a message.
• If you used the Power-on/Ready sequence to
print a test card, check the printer for problems.
• If you changed the printer name, power the PC
off and on.
Steady Red The printer has a condition that requires service or the
printer did not power-on correctly. To attempt to correct
the condition, power the printer off and on before
calling for service.
Off The printer power is off.
Status Light Description Meaning

DataCard SP55 Plus Specifications

General

Print Resolution	300 dpi
Card Capacity	100 card input hopper
Card Size	CR-80 (85.6 mm x 54 mm)
Interface	USB
Print Capability	Single-sided
Card Thickness	40 mil
Operating System Support	Windows 7