DataCard SP55 Plus User Manual

Page 14
5
The dialog box opens.
6 View settings or change settings.
• Make sure that driver settings match printer
features and supplies used.
• The Print Ribbon Type setting is read from
the printer and cannot be changed (for most
connection types).
• If you change the card design, review and
update all settings for the new card design.
• Use the default settings of “Spool printing
so program finishes printing faster.” and
“Enable bi-directional support.”
7 Choose OK to save and close or choose
Cancel to close without saving changes.
See SP Series Info Central for detailed setup
information, including information about settings for
card features.
Printing Preferences dialog box for Windows
2000 and Windows XP

DataCard SP55 Plus Specifications

General

Print Resolution	300 dpi
Card Capacity	100 card input hopper
Card Size	CR-80 (85.6 mm x 54 mm)
Interface	USB
Print Capability	Single-sided
Card Thickness	40 mil
Operating System Support	Windows 7