Page 16
The Printer Toolbox displays:
• The current state of communication between the
driver and printer.
• Message text, if there are any messages.
• The current port mode, which can be USB, Shared
Mode, or Directly Networked.
• The printer type.
• The driver and printer firmware version numbers.
Communication automatically resumes when you print a
card, or when you open the Properties or Printing
Preferences dialog box.
Buttons on the Printer Toolbox are grayed out when a
card is ready to print or is printing, when there is a
message, or when the printer is powered off. Wait until
printing is done before printing a sample card, running a
cleaning card, or using advanced setup. Some buttons
do not apply to this printer and are always gray.
See SP Series Info Central for more information about
the Printer Toolbox.
To Next Page
Loading...
Need help?
General
