for your choice of gamma, so choosing a gamma setting close to the display’s native gamma minimizes lost
levels and increases smoothness. Choosing a whitepoint near to paper white under your viewing or proofing
lights can make display to print matching easier. More advanced settings and options are described
elsewhere in the Help files. If in doubt, start at 2.2/6500, unless you find a specific reason to use other
settings.
Further Information
For information such as a list of Frequently Asked Questions and details on all
Datacolor products be sure to visit our website: www.datacolor.com/Spyder3
To Next Page
Loading...
Need help?
General
