New Display
Help Index
Usual Setting
Mark the checkbox to allow the display to be calibrated by the software.
The Purpose of This Step
When a new display device is found by the software the New Display Assistant will run.
New Display is the first screen of this process. Successive screens will then ask the
user to identify the type of display (CRT/LCD) and indicate what controls the monitor
has (Brightness, Contrast, etc.)
Also on this screen (New Display) there is a checkbox where the user can indicate
whether they want the software to calibrate this display. If this checkbox is not
marked then the application will ignore the corresponding display – not offering to
calibrate it and (on the Windows operating system) not trying to apply calibration data
to that display’s video card upon computer startup.
Further Information
For information such as a list of Frequently Asked Questions and details on all
Datacolor products be sure to visit our website: www.datacolor.com/Spyder3
To Next Page
Loading...
Need help?
General
