Profiling – Print Target
Here you have a number of choices regarding which test target to print out and
measure.
The EZ Targets have larger, wider patches that make them easier to measure.
They print on twice as many sheets of paper as the Classic Targets.
Either kind of target, EZ or Classic, can be measured with or without the
SpyderGuide. The purpose of the guide is to help you align the Spectro with the
rows of patches while moving from left to right whether you're measuring by
patch or strip.
Most printers will perform well with the High Quality Target, with or without
Extended Grays. With some printer configurations, it can be beneficial to print the
extra set of Extended Grays for your profile target sheet set, even if you aren't
printing Black and White. Once you have selected the appropriate target, press
the "Print" button.
To Next Page
Loading...
Need help?
General
