Serialization and Activation
First, download and install the SpyderPRINT software from the Datacolor website
(follow the link included in the package).
Next, make sure that your SpyderPRINT is plugged into a USB port on your
computer; make sure it is a direct port, not on a keyboard, hub, or extension
cable.
Enter your serial number located on the welcome card, or license code from your
email if you have already registered the software on another machine. With the
easy automated activation, please make sure that your computer is connected to
the internet and that no firewall blocks your software from communicating with
the Datacolor activation server.
To Next Page
Loading...
