To Next PageTo Next Page
Need help?Do you have a question about the Datalogic CBX500 and is the answer not in the manual?
General| Input voltage | 10 - 30 V |
|---|---|
| Power requirements | 2.5W |
| Display | Yes |
| Dimensions (WxDxH) | 180 x 71 x 192 mm |
| Keys quantity | 3 keys |
| Product color | Blue |
| Display resolution | 20 x 4 pixels |
| International Protection (IP) code | IP56 |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Weight | 780 g |
|---|
Describes BAxxx M12 Panel Connectors for CBX/SC4000, providing direct connection.
Lists available cables and connectors for the BA100/BA200.
Details general rules for network shielding and chassis grounding.
Provides information on accessing Datalogic support services and downloads via website.
Details the CBX500 connection box for Datalogic reading devices, its flexibility and accessories.
Lists available accessories for the CBX500 system.
Highlights safety measures for power supply installation and usage of the CBX500.
Lists readers directly connectable to the CBX500 via 25-pin connector.
Details hardware compatibility and passive connection considerations.
Procedure for opening the CBX500 for maintenance or installation.
Describes mounting options for CBX500 on surfaces, DIN rails, or Bosch frames.
Explains how to configure the power source jumper for the CBX500.
Details jumper settings for connecting network shield to earth ground or filter.
Explains how to select reading device chassis grounding method via jumpers.
Details the 9-pin connector for auxiliary serial interface for configuration and data monitoring.
Explains ID-NET and RS485 HD termination resistance switch settings.
Describes the function of the CBX500 indicator LEDs for power, communication, and I/O.
Details CE marking and European directives compliance for the CBX500.
Details FCC compliance rules and regulations for the CBX500 device.
Details EAC compliance for the CBX800, covering Eurasian conformity.
Information on accessing Datalogic support, downloads, and repair programs online.
Copyright, trademark, and liability information for Datalogic products.
Overview of the CBX800 Gateway connection box and its functionalities.
Lists the items included in the CBX800 Gateway package.
Lists optional accessories available for the CBX800.
Lists readers compatible with the CBX800 via the 25-pin connector.
Procedure for opening the CBX800 for installation or maintenance.
Describes the three main parts of the CBX800 for easier access to components.
Details mounting CBX800 on surfaces, DIN rails, or Bosch frames.
Information on powering the CBX800 via spring clamp connector or 25-pin connector.
Configuration of the power source jumper for the CBX800.
Jumper settings for connecting the reading device shield to earth or filter.
Jumper settings for selecting reading device chassis grounding method.
Jumper settings for connecting network shield to earth ground or filter.
Settings for ID-NET and RS485 HD termination resistance switches.
Configuration for RS485 HD termination resistance switch.
Overview of rotary switches for network type, address, and baud rate selection.
Allows manual selection of network type using rotary switches.
Details baudrate selection for ID-NET™™ network slaves.
Procedure for resetting CBX800 configuration to factory defaults.
Details the RS232 interface for connecting the CBX800 to a host computer for code data transmission.
Explains the RS485 full-duplex interface for point-to-point connections over longer distances or noisy environments.
Covers the RS485 half-duplex interface for polled communication protocols and multidrop connections.
Describes the pins used to connect the ID-NET™ interface for network communication.
Details the RS232 interface for data source configuration and monitoring via the CBX800.
Details the RS485 Full-Duplex interface for data source connections.
Describes the 9-pin connector for configuring external reading device parameters.
Explains connections for external trigger input (Input 1) using CBX800 power or external supply.
Details connections for Generic Input (Input 2) using CBX800 power.
Illustrates output connections using CBX800 power for open emitter and collector outputs.
Illustrates output connections using external power for open emitter and collector outputs.
Configures CBX800 for Fieldbus Gateway: Net Type, Topology Role, and Address settings.
Configures CBX800 for Ethernet/IP Gateway: Net Type, Topology Role, and Address settings.
Configures CBX800 for ID-NET™™ Gateway: Net Type, Topology Role, and Baud Rate settings.
Configures CBX800 for MUX32 Gateway: Net Type, Topology Role, and Protocol Address settings.
Details CE marking and European directives compliance for the CBX800.
Details FCC compliance rules and regulations for the CBX800 device.
Details EAC compliance for the CBX800, covering Eurasian conformity.
