To Next Page

To Previous Page

The following Keyboard Nationality selections are only valid

for IBM AT compatible PCs:

Japanese

i'+k

Russian (Latin)

i'+#k

Russian (Cyrillic)

i'+"Kk

Hungarian

i'+#Pk

Yugoslavian

i'+$Uk

Romanian

i'+%Zk

Czechoslovakian

i'+&_k

1 DEFAULT

Read the RESTORE DEFAULT

Leggere il codice che ripristina i default.

Lecture du code de configuration par défaut.

Lesen Sie den Restore Default Code, um die

Werkseinstellung wieder herzustellen.

RESTORE DEFAULT

iPk

RS232 DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no

handshaking, delay disabled, rx timeout 5 sec., ack/nack

protocol disabled, FIFO enabled, serial trigger lock

disabled;

DATA FORMAT

: code identifier disabled, no field adjustment,

code length not transmitted, no header, terminator =

CR-LF, character replacement disabled

WEDGE DEFAULT SETTINGS

USA keyboard, caps lock off, num lock unchanged, inter-

character and inter-code delays disabled, control character

emulation = ctrl+shift+key;

DATA FORMAT

: code identifier disabled, no field adjustment,

code length not transmitted, no header, terminator =

ENTER, character replacement disabled

PEN EMULATION DEFAULT SETTINGS

interpret operating mode, conversion to code 39 disabled,

output level normal, idle level normal, minimum output

pulse 600 µs, overflow medium, inter-block delay disabled

POWER SAVE

sleep state disabled

READING PARAMETERS

trigger type = hardware, trigger signal = level, no trigger

timeout, Flash On = 1 sec, Flash Off = 0.6 sec, one read

per cycle, safety time 0.5 sec, beeper intensity high, tone 2,

aiming spot disabled

Brand	Datalogic
Model	DRAGON D101
Category	Barcode Reader
Language	English

Datalogic DRAGON D101 User Manual

Table of Contents

Questions and Answers:

Datalogic DRAGON D101 Specifications

Related product manuals