Datalogic DSM0400 - User Manual

Other manuals for Datalogic DSM0400

Questions and Answers

B
Brandi MartinezAug 10, 2025
What to do if Datalogic DSM0400 Barcode Reader LED is on but barcode doesn't decode?
- T
  Taylor LawrenceAug 11, 2025
  If the LED is on, but your Datalogic Barcode Reader isn't decoding barcodes, there could be a few reasons. First, the reader might not be programmed to read that specific type of barcode; make sure it is. Second, the barcode label itself might be damaged or unreadable; inspect the label or try a different barcode. Finally, the distance between the reader and the barcode could be off; try moving the reader closer or further away.
R
ruth87Aug 16, 2025
Why Datalogic DSM0400 decodes but doesn't transmit to the host?
- A
  Alan WatsonAug 16, 2025
  If your Datalogic Barcode Reader decodes the barcode but doesn't transmit it to the host, the imager might not be programmed for the correct host type. To fix this, scan the appropriate host type barcode.
A
alexamartinAug 22, 2025
What to do if my Datalogic DSM0400 Barcode Reader LED is on but the barcode won't decode?
- A
  April NealAug 22, 2025
  If the LED is on but the barcode doesn't decode, the issue could be due to several reasons: * The Datalogic Barcode Reader might not be programmed to read that specific barcode type. * The barcode label might be damaged or unreadable, so ensure the label isn't defaced and try another barcode. * The distance between the barcode reader and the barcode might be incorrect. Try moving the barcode reader closer to or further away from the barcode.
K
Kevin BrownAug 28, 2025
Why does nothing happen when I pull the scan button on my Datalogic DSM0400 Barcode Reader?
- T
  Tanner DawsonAug 28, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, here are a few things to check: 1. **Power:** Ensure the system has power and the power supply is properly connected. 2. **Cable Connections:** Verify that all interface and power cables are securely connected.
N
Nicole BurnsSep 3, 2025
How to troubleshoot Datalogic DSM0400 when nothing happens after pulling the scan button?
- M
  marcus40Sep 3, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, start by checking the system power and ensure the power supply is properly connected. Also, make sure all cable connections are secure, as loose interface or power cables could be the cause.

Datalogic DSM0400 Specifications

General

Scanning Technology	Laser
Light Source	650 nm visible laser diode
Interface	RS-232, USB
Power Supply	5 VDC
Operating Temperature	0°C to 45°C
Storage Temperature	-20 to 70 °C
Humidity	5 to 95% (non-condensing)
Drop Specification	1.5 m to concrete