Product Reference Guide 15
Chapter 3
Configuration Using Bar Codes
This and following sections provide programming bar codes to configure your
scanner by changing the default settings. For details about additional methods
of programming, see "
Customizing Configuration Settings" on page 12
.
NOTE
You must first enable your scanner to read bar codes in order to
use this section. If you have not done this, go to
Setup, starting on
page 5
and complete the appropriate procedure.
Configuration Parameters
Once the scanner is set up, you can change the default parameters to meet your
application needs. Refer to "
Resetting the Product Configuration to Defaults" on page
13
for initial configuration in order to set the default values and select the
interface for your application.
The following configuration parameters are divided into logical groups, making
it
easy to find the desired function based on its reference group.
Interface Configuration:
• "RS-232 ONLY Interface" on page 17
• "USB Keyboard ONLY Interface" on page 23
• "USB-OEM ONLY Interface" on page 51
Parameters common to all interface applications:
• "
Global Prefix/Suffix" on page 54
• "
Data Format" on page 53
offers advanced configuration options for custom-
ization of scanned data output.
• "
Reading Parameters" on page 57
control various operating modes and indi-
cators status functioning.
To Next Page
Loading...
Need help?
General
