Enter/Exit Programming Mode
52 DSM0400 Fixed Mount Area Imager Bar Code Reader
USB-OEM Device Usage
The USB-OEM protocol allows for the scanner to be identified as one of two dif-
ferent types of bar code scanners. Depending on what other scanners you may
a
lready have connected to a USB-OEM POS, you may need to change this setting
to enable all devices to communicate.
Options are:
• Tabletop Scanner
• Handheld Scanner
NOTE
DEFAULT
USB-OEM Device Usage = Tabletop Scanner
USB-OEM Device Usage = Handheld Scanner
It may be necessary to switch device usage when connecting two
scanners of the same type to a POS system.
To Next Page
Loading...
