To Next Page

To Previous Page

Enter/Exit Programming Mode

94 DSM0400 Fixed Mount Area Imager Bar Code Reader

Code 39 Set Length 1

This feature specifies one of the barcode lengths for Code 39. Length 1 is the

minimum label length if in

Variable Length on page 93

Mode, or the first fixed

length if in

Fixed Length on page 93

Mode. Length includes the barcode’s data

characters only. The length can be set from 0 to 50 characters. For more

detailed programming instructions, see "Set Length" on

Chapter 4, References

Table 1

provides examples for setting Length 1.

Table 1. Code 39 Length 1 Setting Examples

STEP ACTION EXAMPLES

Desired Setting

00 Characters 07 Characters 15 Characters 50 Characters

Scan ENTER/EXIT PROGRAMMING MODE

Scan SELECT CODE 39 LENGTH 1 SETTING

Scan Two Characters From

Appendix C

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

Scan ENTER/EXIT PROGRAMMING MODE

Select Code 39 Set Length 1 Setting

Make a mistake? Scan the CANCEL barcode to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

01 = Length 1 is 1 Characters

Datalogic DSM0400 User Manual

Other manuals for Datalogic DSM0400