70 DSM0400 Fixed Mount Area Imager Bar Code Reader
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies.
When this feature is enabled, you will be unable to read normally-printed labels
or programming labels in this manual. Scan the “Disable” bar code below to
return the scanner to its default for this feature. To set decoding for only 2D
codes, go to "
2D Normal/Inverse Symbol Control" on page 165
. For additional
options, see the Aladdin configuration application.
NOTE
CAUTION
Decode Negative Image = Disable
DEFAULT
Decode Negative Image = Enable
When this feature is enabled, you will be unable to read other program-
ming labels in this manual.
Unlike some programming features and
options, Decode Negative
Image selections require that you scan only one programming bar code
label. DO NOT scan an ENTER/EXIT bar code prior to scanning a Decode
Negative Image bar code.
To Next Page
Loading...
Need help?
General
