What does 'Node Reset' mean on my Datalogic DS8110 Barcode Reader and how to fix it?
If your Datalogic Barcode Reader displays 'Node Reset' in a Master/Slave configuration, it indicates that a Slave unit has reset and sent a reset message to the Master. If this condition persists, replace the scanner.
What to do if my Datalogic Barcode Reader shows 'Node not responding'?
If the Datalogic Barcode Reader displays 'Node not responding' in a Master/Slave configuration, it means the Master unit isn't detecting a Slave unit. Ensure all cables are securely connected, verify the scanner's power source is working, and if the problem continues, replace the scanner.
What does 'Motor Failure' mean on my Datalogic Barcode Reader and how to fix it?
A 'Motor Failure' message on your Datalogic Barcode Reader indicates that the scanner's mirror wheel motor has failed. This issue isn't field serviceable, so the recommended solution is to replace the scanner.
Why does my Datalogic Barcode Reader display 'Laser Failure' and what should I do?
If your Datalogic Barcode Reader shows 'Laser Failure', it means the scanner's laser has failed. This is an internal failure and is not field serviceable. The suggested solution is to replace the scanner.
What does Fieldbus Comm Error mean for Datalogic DS8110 Barcode Reader, and how can I fix it?
A 'Fieldbus Comm Error' indicates that the Datalogic Barcode Reader cannot communicate with the fieldbus module. To resolve this, replace the fieldbus module.
What to do if my Datalogic DS8110 Barcode Reader shows 'Encoder Timeout' error?
If your Datalogic Barcode Reader displays an 'Encoder Timeout' error (which occurs in PackTrack mode), it means no encoder (tachometer) signal was detected in the specified time. Try adjusting the encoder (tachometer) mounting or the Encoder Timeout setting.
What does 'Fieldbus Config Error' mean on my Datalogic DS8110 Barcode Reader and how to resolve it?
A 'Fieldbus Config Error' on your Datalogic Barcode Reader indicates an error configuring the fieldbus module. The suggested solution is to replace the fieldbus module.
What does 'Input 1 Failure' mean on my Datalogic DS8110 and how to fix it?
An 'Input 1 Failure' on your Datalogic Barcode Reader (in PackTrack Mode) means the primary PS (photoelectric sensor) input is stuck in the active state. Try realigning or replacing the photoelectric sensor.
What does 'Input 2 Failure' mean on my Datalogic DS8110 Barcode Reader and how to resolve it?
An 'Input 2 Failure' on your Datalogic Barcode Reader (in PackTrack Mode) means the secondary PS (photoelectric sensor) input is stuck active. Try realigning or replacing the photoelectric sensor.
What does 'Encoder Failure' mean on my Datalogic Barcode Reader and how to fix it?
An 'Encoder Failure' on your Datalogic Barcode Reader (in PackTrack Mode) indicates that the phase input (trigger source) is activated while the encoder (tachometer) is stopped. Try adjusting, realigning, or replacing the encoder (tachometer).
General| Brand | Datalogic |
|---|---|
| Model | DS8110 |
| Category | Barcode Reader |
| Language | English |
Lists related documentation for the DS8110 management.
Outlines Datalogic's support services and information available on their website.
Provides information on patents covering the product.
Details conformity to European electrical safety standards.
Provides safety information for correct use of laser diodes in scanners.
Mentions compliance with Indian standards.
Explains the purpose of warning and serial labels on the scanner.
Specifies requirements for the product's power source.
Indicates the product's certification by CSA.
States the product's compliance with European directives.
Details compliance with Federal Communications Commission rules.
Overview of the DS8110 barcode scanner's features and technologies.
Describes the industrial applications for the DS8110 barcode scanners.
Explains the DS8110 model naming convention.
Lists the different DS8110 scanner models available.
Details the DS8110's X-PRESS HMI for specific tasks.
Lists available accessories for the DS8110 barcode scanner.
Describes the optional Datalogic Photoelectric Sensor for item detection.
Explains the tachometer's role in providing feedback on conveyor speed.
Introduces the CBX510 connection box for scanner connectivity.
Describes the SC5000 Controller for installation, setup, and maintenance.
Outlines necessary steps before beginning mechanical installation of components.
Details the expected contents of the DS8110 scanner package.
Provides a step-by-step guide for mechanical installation and setup.
Lists information required about the application before installation.
Covers general installation aspects including dimensions and clearances.
Lists steps for preparing electrical installation, including safety.
Provides a sequence for installing and connecting the DS8110 barcode scanner.
Illustrates common connection setups for the DS8110 system.
Offers general precautions for electrical installation and wiring.
Details the DS8110's connector panel for application wiring.
Explains how to connect a PC to the DS8110 for initial setup.
Provides pin-out details for the unit's power connector.
Covers important considerations and safety for power connections.
Details installation information for the CBX510 connection box.
Describes the optocoupled main serial interface standards (RS232, RS422).
Illustrates standard wiring for photoelectric sensors to the CBX510.
Provides diagrams for wiring encoders/tachometers to the CBX510.
Explains the CBX510's output block for wiring external accessories.
Details how to connect to the SC5000 System Controller.
Provides instructions to ensure proper grounding for system function.
Outlines steps to confirm proper mechanical and electrical installation.
Guides users on initial setup and accessing e-Genius.
Explains the e-Genius menu structure and text entry tool.
Details how to use the Modify Settings menu for system configuration.
Covers viewing and editing system information like description and role.
Explains global settings applied to the system master and distributed to slaves.
Guides on viewing device information and configuring scanners.
Provides tools to monitor system performance and view messages.
Covers backup, restore, firmware updates, and reboot functions.
Describes the initial power-up sequence and default parameters.
Step-by-step guide for basic installation using the CBX510.
Step-by-step guide for basic installation using the SC5000 Controller.
Explains the meaning of the different LEDs on the scanner.
Details the functions of the X-PRESS HMI and its buttons.
Explains the PackTrack patented operating mode for reading and assigning codes.
Provides procedures for replacing failed scanners quickly.
Describes common system hardware configurations and their setup.
Explains the ACR technology for reconstructing barcodes from partial scans.
Shows how to identify the scanner model and its reading capabilities.
Introduces instructions for maintaining DS8110 barcode scanners.
Details tasks for maintaining optimal scanner performance.
Explains how LED patterns signal different failure conditions.
Lists error codes, their explanations, symptoms, and required actions.
Provides detailed specifications for the DS8110 scanning system.
To Next Page